500PSM03A 1MRB150038R1 | 電源模塊 | XVC768102 3BHB007211R102
型號：500PSM03A 1MRB150038R1
類別：電源模塊
毛重:0.54 kg
保障：365天
發貨：3-5天/周
條件：全新 & 有貨
付款：電匯，西聯匯款
尺寸：20 毫米 x 125 毫米 x 50 毫米
重量：2公斤
保證：12個月
500PSM03A 1MRB150038R1 電源模塊是一種獨立的電源轉換設備，可以直接貼裝在印刷電路板上，為專用集成電路(ASIC)、數字信號處理器(DSP)、微處理器、存儲器、現場可編程門陣列(FPGA)及其他數字或模擬負載提供供電。它能夠?qū)⑤斎氲碾娫?如交流電或直流電)轉換為特定電壓和電流的電源，以滿足不同電子設備的電源需求。
作用
電源變換和調節：通過內部的降壓、升壓或直流變換電路，將輸入電壓(如AC220V)變換為設備所需的輸出電壓(如DC5V、DC12V等)，并對輸出電壓進行調節，保證輸出電壓穩定在一個規定的范圍內，以保證設備的正常工作。
輸出短路保護：500PSM03A 1MRB150038R1 通過內部的限流保護電路，避免因設備輸出短路而導致電源模塊損壞或引起其他安全隱患。
過溫保護：當電源模塊內部溫度過高時，其內部的過溫保護電路會自動啟動，保護電源模塊的電路和元件不受過熱損傷。
EMC電磁兼容：500PSM03A 1MRB150038R1 通過內部的濾波器和屏蔽電路，降低高頻噪聲和電磁干擾的輻射和散射，以保證設備的電磁兼容性和抗干擾能力。
節能環保：現代化設計的電源模塊能夠耗能較低，充分利用能量，節約資源;并且在實際的應用過程中，對環境污染的影響比傳統電源設備更小。
Model: 500PSM03A 1MRB150038R1
Category: Power module
Gross weight :0.54 kg
Guarantee: 365 days
Delivery: 3-5 days/week
Condition: New & available
Payment: Wire transfer, Western Union
Dimensions: 20 mm x 125 mm x 50 mm
Weight: 2 kg
Guarantee: 12 months
The 500PSM03A 1MRB150038R1 power module is a self-contained power conversion device that can be mounted directly on a printed circuit board to provide power for application specific integrated circuits (ASics), digital signal processors (DSPS), microprocessors, memory, field programmable gate arrays (FPgas), and other digital or analog loads. It is able to convert the input power supply (such as alternating current or direct current) into a specific voltage and current power supply to meet the power needs of different electronic devices.
effect
Power conversion and regulation: through the internal step-down, boost or DC conversion circuit, the input voltage (such as AC220V) is converted into the output voltage required by the equipment (such as DC5V, DC12V, etc.), and the output voltage is adjusted to ensure that the output voltage is stable within a specified range to ensure the normal operation of the equipment.
Output short circuit protection: 500PSM03A 1MRB150038R1 uses the internal current limiting protection circuit to prevent power module damage or other security risks caused by output short circuit.
Overtemperature protection: When the internal temperature of the power module is too high, the internal overtemperature protection circuit will automatically start to protect the circuit and components of the power module from overheating damage.
EMC Electromagnetic compatibility: 500PSM03A 1MRB150038R1 through the internal filter and shielding circuit, reduce the radiation and scattering of high-frequency noise and electromagnetic interference, to ensure the electromagnetic compatibility and anti-interference ability of the equipment.
Energy saving and environmental protection: The power module with modern design can consume less energy, make full use of energy and save resources; And in the actual application process, the impact on environmental pollution is smaller than the traditional power supply equipment.
