>>>>>型號:140734-05 動態壓力監測器 四通道監測器
【功能描述】
3500/64M動態壓力監測器是一個單槽,四通道監測器,從高溫接受輸入壓力傳感器,并使用此輸入來驅動警報。的監視器每個通道的一個測量變量是帶通動態壓力。
您可以使用3500機架配置軟件進行以下操作配置帶通角頻率與一個附加陷波濾波器。監視器提供一個記錄器輸出控制系統的應用。
主要用途為3500/64M動壓
監視器是提供以下內容:
l連續比對保護機器根據配置的告警監控參數驅動警報的設定值
l操作所需的基本機器信息維修人員
每個通道,根據配置,限制其輸入信號產生的各種參數稱為被測變量。您可以配置警報和危險設定值每個活躍的測量變量。
>>>>>型號:140734-05 動態壓力監測器 四通道監測器
【英文介紹】
The 3500/64M dynamic pressure monitor is a single-slot, four-channel monitor that accepts an input pressure sensor from high temperatures and uses this input to drive an alarm. One of the measured variables of the monitor for each channel is the bandpass dynamic pressure.
You can use 3500 rack configuration software to configure the bandpass angular frequency with an additional notch filter. The monitor provides a recorder output control system application.
The main use is 3500/64M dynamic pressure
The monitor is provided with the following:
l Continuous comparison The protection machine drives the alarm Settings according to the configured alarm monitoring parameters
l Basic machine information required for operation maintenance personnel
Each channel, according to its configuration, limits the various parameters generated by its input signal called the variable under test. You can configure alarm and hazard setpoints for each active measurement variable.
>>>>>型號:140734-05 動態壓力監測器 四通道監測器