>>>>>型號:125712-01 繼電器模塊 振動監測系統

【功能描述】

3500/32 125712-01 本特利內華達 3500 系列振動監測系統

我們在 04 機組安裝的 MarkVie 控制系統和本特利內華達 3500 系列振動監測系統之間經常出現通信故障。在提到的情況下觀察到：

HMI 相關屏幕上沒有可用的振動數據。（參考附截圖）

MKVIe 本地和遠程 HMI 提供渦輪機、相關輔助設備和過程監控和操作參數。（參考附件截圖）

這個故障在所有四臺機器上一個接一個出現，時間段不到一個小時。參考 警報和控制器診斷屏幕截圖。

安裝在本特利內華達的 EGD 通信網關模塊通信 LED“OFF”和 OK LED 在一臺設備上開始閃爍。此外，安裝在本特利內華達的 EGD 通信網關模塊通信 LED“亮”，其他 03 單元的 OK LED 呈綠色亮起。

在 WorkstationST Monitor 狀態下，EGD 服務器的服務運行正常。（參考隨附的 WorkstationST 屏幕截圖）。

所有以太網電纜似乎都正常，并且相信此通信問題沒有硬件問題。

連接 Bently Nevada Rack 配置器實用程序（安裝在單獨的筆記本電腦上，作為工程工作站）并驗證 BN 通道上的所有讀數都可用，并且所有模塊都處于正常狀態，因此單元正在在線運行。此外，通過配置實用程序驗證時，EGD 通信網關狀態為“不正?！?。（參考隨附的 EGD 屏幕截圖）

ENTLY 3500/32 125712-01 脹差軸向位置模塊，接受來自內華達接近傳感器的輸入信號，條件提供各種振動和位置的測量，并比較條件的用戶可編程的警報信號。用戶可編程的3500/40m的3500架配置每個通道軟件來執行下功能：徑向、振動、推力、位置、脹差。

注：監測通道是對的，可以在一個時間內完成這些功能的兩個功能。通道2和1可以執行一個功能，而通道3和4執行另一個（或相同的）功能。

3500/40m監測的主要目的是提供：

1。通過不斷比較與配置監測參數警報設定為驅動警報機械保護。

2。對操作和維護人員的基本機器信息。

每個通道，根據配置，通常情況下，其輸入信號的各種參數稱為“靜態值”。用戶可以配置每個活動的靜態值和危險值為主動靜態值的任何兩個警報設定值。

3500/45位置顯示器

3500/53模塊可以組合成一個二取二或二（推薦）系統。

冗余電源在3500架包含超速檢測系統的使用要求。

 >>>>>型號:125712-01 繼電器模塊 振動監測系統

【英文介紹】

3500/32 125712-01 Bentley Nevada 3500 Series Vibration monitoring system

There are frequent communication failures between the MarkVie control system we installed in Unit 04 and the Bentley Nevada 3500 Series vibration monitoring system. In the cases mentioned, it was observed that:

There is no vibration data available on the HMI-related screen. (See attached screenshot)

MKVIe local and remote HMI provides turbine, associated auxiliary equipment and process monitoring and operational parameters. (See attached screenshot)

The glitch appeared one after the other on all four machines over a period of less than an hour. Refer to the alert and controller diagnostics screenshots.

EGD Communication Gateway module installed in Bentley Nevada Communication LED "OFF" and OK LED started flashing on one device. In addition, the communication LED of the EGD communication Gateway module installed in Bentley Nevada is "on", and the OK LED of the other unit 03 is green.

In the WorkstationST Monitor state, the EGD server is running properly. (Refer to the attached screenshots of WorkstationST).

All Ethernet cables appear to be working properly and there is believed to be no hardware issue with this communication issue.

Connect the Bently Nevada Rack configurator utility (installed on a separate laptop as an engineering workstation) and verify that all readings on the BN channel are available and that all modules are in good condition, so the unit is running online. In addition, the EGD communication gateway is in an "abnormal" state when verified by the configuration utility. (Refer to the attached EGD screenshot)

The ENTLY 3500/32 125712-01 differential axial position module accepts input signals from Nevada proximity sensors, provides measurements of various vibration and position conditions, and compares the conditions to user-programmable alarm signals. The user programmable 3500/40M 3500 frames are configured with each channel software to perform the following functions: radial, vibration, thrust, position, expansion.

Note: The monitoring channel is right and can accomplish two functions of these functions in one time. Channels 2 and 1 May perform one function, while channels 3 and 4 perform another (or the same) function.

The main purpose of 3500/40m monitoring is to provide:

1. Mechanical protection for driving alarms is set by constantly comparing and configuring monitoring parameters for alarms.

2. Basic machine information for operators and maintenance personnel.

Each channel, depending on the configuration, typically has various parameters of its input signal called "static values". The user can configure the static value and danger value for each activity to any two alert setpoints for the active static value.

3500/45 position display

The 3500/53 modules can be combined into a two out of two or two (recommended) system.

Redundant power supply in 3500 includes overspeed detection system use requirements.

>>>>>型號:125712-01 繼電器模塊 振動監測系統