IC697CHS790 | 可編程控制器安裝架 90-70 系列
描述:可編程控制器安裝架
電壓 :5 伏直流電
產品描述; 標準PLC機架
安裝 ：面板安裝
支持安裝 ：后部和前部安裝
VME(英語：VME)： 專為支持 VME 標準 C.1 而設計的系統
當前 ;20 安培
尺寸 :7.5x19x11.5英寸.
該IC697CHS790是一款 9 插槽后置機架，是 90-70 系列可編程邏輯控制器 (PLC) 系列的一部分，該系列以前由 GE Fanuc Automation 提供，現在隸屬于 Emerson Automation。該硬件通過可用的電子安裝插槽為任何 IC697 模塊提供安裝位置。它允許任何已安裝的模塊連接到背板以接收背板電源并與通信適配器或中央處理器 (CPU) 進行通信。
IC697CHS790安裝插槽適用于任何 IC697 模塊。還提供了另一個安裝插槽，用于安裝機架電源。該機架尺寸為 11.15 高 x 19 寬 x 7.5 深 (283mm x 483mm x 190mm)，支持?jǐn)U展 I/O，其中可以擴展額外的兩 (2) 個機架并共享相同的電源模塊。
IC697CHS790 I/O 配置可更軟，而機架識別或?qū)ぶ酚晌挥跈C(jī)架電源后面的四 (4) 個跳線提供。作為后置機架，需要 10 英寸深的空間才能正確安裝此硬件。在需要熱量積聚的應用中，該機架具有特定的風扇附件，可用于防止這種情況的發生。兼容的機架式風扇組件包括用于 120 VAC 電源的IC697ACC721;IC697ACC724 用于 240 VAC 電源，IC697ACC744用于 24 VDC 電源。使用機架延長時，需要適當?shù)碾娫淳€來為后續機架供電。
Description: Programmable controller mounting rack
Voltage :5 volts DC
Product description; Standard PLC frame
Installation: Panel installation
Support installation: rear and front installation
VME: A system designed to support the VME standard C.1
At present; 20 amps
Dimensions :7.5x19x11.5 inches.
The IC697CHS790 is a 9-slot rear rack that is part of the 90-70 series programmable Logic controller (PLC) family, previously offered by GE Fanuc Automation and now owned by Emerson Automation. The hardware provides a mounting location for any IC697 module through an available electronic mounting slot. It allows any installed module to be connected to the backplane to receive backplane power and communicate with a communications adapter or central processing unit (CPU).
The IC697CHS790 installation slot is suitable for any IC697 module. Another mounting slot is also provided for mounting the rack power supply. The rack measures 11.15 H x 19 W x 7.5 D (283mm x 483mm x 190mm) and supports extended I/O, where an additional two (2) racks can be extended and share the same power module.
The IC697CHS790 I/O configuration can be softer, while rack identification or addressing is provided by four (4) jumpers located behind the rack power supply. As a rear rack, 10 "deep space is required to properly install this hardware. In applications where heat build-up is required, the rack has specific fan attachments that can be used to prevent this from happening. Compatible rack fan assemblies include IC697ACC721 for 120 VAC power supplies; The IC697ACC724 is used for 240 VAC power supply and the IC697ACC744 is used for 24 VDC power supply. When a rack extension is used, proper power cables are required to supply power to subsequent racks.
