IC697CSE925RR | 單插槽PLC CPU | 夠?qū)崟r(shí)控制工業機械
型號：IC697CSE925RR
模塊類型： 浮點 CPU
插槽數量： 1 (單插槽)
所需電流： 3.3 安培標稱值
點數： 12K 輸入和輸出(任意混音)
串口：1
支持： IC660/IC661 I/O 和 IC697 I/O
該IC697CSE925RR由GE自動化生產，是一款能夠?qū)崟r(shí)控制工業機械的單插槽PLC CPU。 與 I/O 和“智能選件”模塊的通信通過機架安裝的連接背板完成。此設備由 MS-DOS 或在傳統操作系統(包括 Windows 95 和 Windows NT)上運行的軟件應用程序配置。 該IC697CPM925具有 64MHz 80486DX2 微處理器，每個布爾函數的浮點十進制計算速度快至 0.4 微秒。該器件支持高達 8K 的模擬 I/O 以及 12K 輸入和輸出的任意組合。
該IC697CSE925RR支持以下模塊：IC697 系列的分立和模擬 I/O 模塊、IC660 和 IC661 I/O 模塊以及多個協處理器和通信模塊。 該器件允許最多 1 兆字節或用戶內存，由板載鋰 CMOS 電池維護，設備的日歷和時鐘也是如此。操作系統固件位于閃存中。注意：閃存無法存儲用戶信息。用戶無需拆卸設備或更換 EPROM 即可更新固件。要更新固件，請將設備連接到兼容的計算機，插入固件軟盤，然后運行相應的 Loader 軟件。
Model: IC697CSE925RR
Module type: floating point CPU
Number of slots: 1 (single slot)
Required current: 3.3 amps nominal value
Points: 12K input and output (any mix)
Serial port: 1
Support: IC660/IC661 I/O and IC697 I/O
The IC697CSE925RR, manufactured by GE Automation, is a single-slot PLC CPU capable of controlling industrial machinery in real time. Communication with the I/O and Smart Options modules is done through a rack-mounted connection backplane. This device is configured by MS-DOS or software applications running on legacy operating systems, including Windows 95 and Windows NT. The IC697CPM925 has a 64MHz 80486DX2 microprocessor and calculates floating-point decimal values as fast as 0.4 microseconds per Boolean function. The device supports analog I/O up to 8K and any combination of 12K inputs and outputs.
The IC697CSE925RR supports the following modules: discrete and analog I/O modules of the IC697 family, IC660 and IC661 I/O modules, and multiple coprocessors and communication modules. The device allows up to 1 Megabyte, or user memory, and is maintained by an onboard lithium CMOS battery, as are the device's calendar and clock. The operating system firmware is located in flash memory. Note: Flash memory cannot store user information. Users can update the firmware without disassembling the device or replacing the EPROM. To update the firmware, connect the device to a compatible computer, insert the firmware floppy, and then run the appropriate Loader software.
To operate the IC697CSE925RR, use the three-digit RUN/STOP switch or connect the programmer and use programming software. Devices can be configured through serial, parallel, or Ethernet interfaces. Device configuration is protected by password or manual memory protection key switch. When using the memory guard key switch, be sure to use the parallel connection programmer that is linked to the bus transmitter module. To prevent overheating, a fan of 70 cubic feet per minute (CFM) is required. Installation instructions are provided in the equipment manual. Power off the rack before attempting installation. The memory protection key switch must be OFF, and the toggle switch must be in the STOP position. The battery can be connected to either connector. Connect the device to the slot. Then power on the device.
