UR8LH |模擬輸出模塊| UR9EH
模型:UR8LH
分類:模擬輸出模塊
保修:365天
配送方式:順豐快遞/聯邦快遞
匯款方式:電匯/西聯匯款
是的。下面是電流互感器的詳細說明:
定義:
UR8LH電流互感器將一次電路的大電流直接轉換為二次電路的小電流，為測量儀器、儀表、繼電保護等類似電器供電。
它根據電磁感應原理工作，將一次側的大電流轉換成二次側的小電流進行測量。
結構組成:
UR8LH電流互感器由封閉鐵芯和繞組組成。
初級側繞組的匝數非常小，串在需要測量電流的線路上，因此經常有整個線路的電流流過。
二次繞組匝數比較大，在測量儀和保護回路中串聯。
初級線圈在主電路中連接，初級線圈必須與初級線路電壓對地絕緣，以保證次級電路和人身的安全。
它是如何工作的:
UR8LH電流互感器的工作原理是磁感應。當外部電流通過初級繞組時，產生磁場，磁場誘導磁芯產生磁感應電動勢。這個磁感應電動勢就是電流互感器輸出的電流。
變壓器的轉換率(即一次電流與二次電流的比值)可以通過調節磁芯的匝數和線圈的匝數來調節。
UR8LH | Analog output module | UR9EH
Model :UR8LH
Category: Analog output module
Warranty :365 days
Delivery method: SF Express/Federal
Remittance: Wire transfer/Western Union
Yes. The following is a detailed explanation of the current transformer:
Definition:
UR8LH current transformer converts the large current of the primary circuit directly to the small current of the secondary circuit to supply measuring instruments, meters, relay protection and other similar electrical appliances.
It works according to the principle of electromagnetic induction, converting the large current on the primary side into a small current on the secondary side to measure.
Structure composition:
The UR8LH current transformer consists of a closed core and winding.
The number of turns on the primary side winding is very small and is strung in the line where the current needs to be measured, so there is often the entire current of the line flowing through.
The number of turns of the secondary winding is relatively large, which is connected in series in the measuring instrument and the protection loop.
The primary coil is connected in the main circuit, and the primary coil must be insulated with the primary line voltage to the ground to ensure the safety of the secondary circuit and the person.
How it works:
The UR8LH current transformer operates on the principle of magnetic induction. When the external current passes through the primary winding, a magnetic field is generated, and the magnetic field induces the magnetic core to generate a magnetic induced electromotive force. This magnetic induced electromotive force is the current output by the current transformer.
The transformer conversion ratio (that is, the ratio of the primary current to the secondary current) can be adjusted by adjusting the number of turns of the magnetic core and the number of turns of the coil.
