TRICONEX 4000098-510 | 重模教控制器 冗余供電，提高可靠性
型號：TRICONEX 4000098-510
機架尺寸:標準19英寸
輸入電壓:120VAC
輸出電壓:24VDC
工作溫度:-40°℃~ 70°C
通信協議:Modbus，以太網/IP
規格:*
最多支持8個Triconex模塊
冗余供電，提高可靠性
內置診斷和自檢功能
易于安裝和維
TRICONEX 4000098-510號一種高件能二 重模教控制器,具有,卓越的可靠性和安全性,適用干各種工業自動化和控制應用。
模數控制器是以軟件的形式存在，它能實現各種復雜的控制策略并具有多種擴展功能,但沒有一個功能改變 了反饋調節器的基本功能,即解決過程控制問題.
4000098-510模數調節器在固定程序支配下進行過程控制,通過“組態”可以選擇預定的控制算法和輸入、輸出端連接的相關信號。調節器通過多路輸入和輸出
信號與過程相連接。模數調節器的
P.1、D作用是各自獨立的,可以分別設定,沒有模擬調節器參數間的關聯問題,不用考慮干擾系數問題，模數調節器的PID參數可在更大范圍內自由選擇,與模擬調節
器相比,可調范圍大了許多,這對改善PID調節系統質量是很有利的。
模塊控制器與三?？刂破鞑煌ㄓ?。
4000098-510模塊控制器是以軟件的形式存在,能實現各種復雜的控制策略并具有多種擴展功能,但沒有--個功能改變了反饋調節器的基本功能,即解決過程控制
問題。
Model: TRICONEX 4000098-510
Rack size: Standard 19 inches
Input voltage :120VAC
Output voltage :24VDC
Operating temperature :-40° C ~ 70°C
Communication protocol :Modbus, Ethernet /IP
Specification :*
Supports a maximum of eight Triconex modules
Redundant power supply to improve reliability
Built-in diagnostic and self-test functions
Easy to install and maintain
TRICONEX 4000098-510 A high performance dual die teaching controller with superior reliability and safety for a wide range of industrial automation and control applications.
The analog-digital controller exists in the form of software, which can realize a variety of complex control strategies and has a variety of extended functions, but none of the functions change the basic function of the feedback regulator, that is, to solve the process control problem.
4000098-510 Modulator process control under the control of a fixed program, through the "configuration" can select the predetermined control algorithm and the input and output of the connection of the relevant signals. The regulator has multiple inputs and outputs
The signal is connected to the process. Modulator
The functions of P.1 and D are independent and can be set separately. There is no correlation problem between the parameters of the analog regulator, and there is no need to consider the problem of interference coefficient. The PID parameters of the analog-digital regulator can be freely selected in a wider range and adjusted with simulation
Compared with the controller, the adjustable range is much larger, which is very beneficial to improve the quality of PID regulation system.
Modular controllers and three-mode controllers are not common.
The 4000098-510 module controller exists in the form of software, which can realize a variety of complex control strategies and has a variety of extended functions, but no - one function changes the basic function of the feedback regulator, that is, to solve the process control
Question. The three-mode controller is sine wave, square
