>>>>>型號:VM600IOC4T 輸入/輸出模塊 機架式機械監控系統
【功能描述】
VM600 IOC4T 網絡和處理器之間的輸入/輸出模塊
VM600機架式機械監控系統使用的MPC4和MPC4SIL機械保護卡的高質量、高可靠性接口(輸入/輸出)卡。IOC4T卡支持4個動態通道和2個轉速計(速度)通道，所有這些通道都可以獨立配置。IOC4T接口卡安裝在VM600 ABE04x機架的后部，在MPC4卡或MPC4SIL卡的正后方，以形成卡對。
特征
MPC4或MPC4SIL卡的輸入/輸出(接口)卡–支持4個動態通道和2個轉速表通道
每個動態通道和每個轉速表通道的差分信號輸入和傳感器電源輸出
每個動態通道的差分緩沖(原始)傳感器輸出
每個動態通道的DC輸出可配置為基于電流的信號(4至20 mA)或基于電壓的信號(0至10 V)
>>>>>型號:VM600IOC4T 輸入/輸出模塊 機架式機械監控系統
【英文介紹】
Input/output module between the VM600 IOC4T network and the processor
The VM600 rackmount mechanical monitoring system uses MPC4 and MPC4SIL mechanical protection cards with high quality and high reliability interface (input/output) cards. The IOC4T card supports 4 dynamic channels and 2 tachometer (speed) channels, all of which can be configured independently. The IOC4T interface card is installed at the rear of the VM600 ABE04x rack, directly behind the MPC4 card or MPC4SIL card to form the card pair.
trait
Input/output (interface) cards for MPC4 or MPC4SIL cards - supports 4 dynamic channels and 2 tachometer channels
Differential signal input and sensor power output for each dynamic channel and each tachometer channel
Differential buffered (raw) sensor output for each dynamic channel
The DC output of each dynamic channel can be configured as a current based signal (4 to 20 mA) or a voltage based signal (0 to 10 V).
>>>>>型號:VM600IOC4T 輸入/輸出模塊 機架式機械監控系統
