>>>>>型號:8810-HI-TX 8通道安全模擬輸入 帶HART
【功能描述】
特征
PAC8000 I/O 是一種完全模塊化的 I/O 解決方案，適用于通用和危險區域應用。它提供了多種 I/O 功能，并具有開放式架構，允許通過選擇適當類型的總線接口模塊 （BIM） 或控制器與各種不同的現場總線進行通信。
現場端子（每個 I/O 模塊一個）卡在托架上并接受現場接線，無需額外的端子或連接。如果在現場損壞，它們可以很容易地更換。全面的機械鍵控系統確保設備安全。
載體通過安裝在平板或T型或G型DIN導軌上來形成PAC8000的物理和電氣主干。它們支持并互連BIM或控制器、電源、I/O模塊和現場終端，并承載內部Railbus的地址、數據和電力線
2 線、3 線或 4 線變送器
HART直通、采集和狀態報告
8914-PSAC 需要 24 VDC 總線現場電源
PAC8000(MOST)控制系統是面向工廠自動化的新一代模塊化開放式控制系統，它為過程控制、離散控制、策略控制及過程監視提供了完整的集成化解決方案。PAC8000控制系統是真正的開放式系統，采用先進的安全型RailBus總線構架；雙重化的硬件體系結合全面的冗余容錯技術和特有的故障安全策略，使得系統可靠性達到99.999%。高速的控制器和大容量?jī)?nèi)存保證系統的執行速率和精度。
>>>>>型號:8810-HI-TX 8通道安全模擬輸入 帶HART
【英文介紹】
trait
The PAC8000 I/O is a fully modular I/O solution for general purpose and hazardous zone applications. It offers a variety of I/O capabilities and has an open architecture that allows communication with a variety of different fieldbuses by selecting the appropriate type of bus interface module (BIM) or controller.
Field terminals (one per I/O module) are clamped into the carrier and accept field wiring without additional terminals or connections. If damaged in the field, they can be easily replaced. A comprehensive mechanical keying system ensures equipment safety.
The carrier forms the physical and electrical backbone of the PAC8000 by mounting on a flat plate or T or G DIN rail. They support and interconnect BIM or controllers, power supplies, I/O modules, and field terminals, and carry the addresses, data, and power lines of the internal Railbus
2 -, 3 - or 4-wire transmitters
HART pass-through, acquisition and status reporting
The 8914-PSAC requires 24 VDC bus field power
PAC8000(MOST) control system is a new generation of modular open control system for factory automation, which provides a complete integrated solution for process control, discrete control, policy control and process monitoring. PAC8000 control system is a real open system, using advanced security RailBus bus architecture; The dual hardware system, combined with comprehensive redundancy and fault tolerance technology and unique fail-safe strategy, makes the system reliability reach 99.999%. The high speed controller and large capacity memory guarantee the execution rate and accuracy of the system.
>>>>>型號:8810-HI-TX 8通道安全模擬輸入 帶HART
